Le matériel de formation de l'examen de meilleur CompTIA RF0-001

Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test CompTIA RF0-001 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test CompTIA RF0-001, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.

La partie plus nouvelle de test Certification CompTIA RF0-001 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel CompTIA RF0-001. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.

La Q&A CompTIA RF0-001 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification CompTIA RF0-001.

Participer au test CompTIA RF0-001 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat CompTIA RF0-001 symbole bien la professionnalité d'un travailleur dans cette industrie.

Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification CompTIA RF0-001 sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.

Code d'Examen: RF0-001
Nom d'Examen: CompTIA (RFID+ Certification)
Questions et réponses: 162 Q&As

RF0-001 Démo gratuit à télécharger: http://www.pass4test.fr/RF0-001.html

NO.1 Which of the following technologies would provide the BEST read range when attached to a
corrugated metal freight container that is 40 feet (12.4 meters)?
A. Passive 13.56 MHz from a one watt interrogator/antenna
B. Passive 860 - 960 MHz from a 4 watt interrogator/antenna C. Active 433.92 MHz, operating at 10 mW
D. Active 2450 MHz, operating at 10 mW
Answer: C

CompTIA   certification RF0-001   certification RF0-001   certification RF0-001

NO.2 While troubleshooting an interrogation zone, a technician discovers that the antenna wires have torn
free of their connectors. Which of the following would be the FIRST step for the technician to take?
A. Secure the cables so they cannot tear free again.
B. Crimp a new end on the cable.
C. Power down the interrogator.
D. Attach the repaired cable to the antenna.
Answer: C

certification CompTIA   RF0-001   RF0-001 examen   RF0-001

NO.3 Which of the following conditions would be MOST likely to cause a ghost tag read?
A. The interrogator did not pass electronic product code (EPC) compliance testing.
B. There is a broken strap between the chip and the antenna on the tag.
C. There are too many tags within an interrogator zone.
D. There is RF interference in an interrogator zone.
Answer: D

CompTIA   RF0-001   RF0-001   RF0-001

NO.4 An Electronic Product Code (EPC) Class 1 Gen 2 RFID system reads the EPC data from memory bank
zero, but the 64-bit EPC code is always zero. Which of the following is MOST likely the cause of the
problem?
A. The EPC code is stored in Bank 1.
B. The tag has been killed.
C. The EPC code was never written to the tag.
D. The access password is zero.
Answer: A

certification CompTIA   RF0-001   RF0-001

NO.5 Which of the following materials have absorptive properties in relation to ultra high frequency (UHF)?
(Select TWO).
A. Damp cardboard
B. Glass
C. Conductive liquids
D. Metal
Answer: AC

CompTIA   certification RF0-001   RF0-001   RF0-001 examen

NO.6 Desktop industrial RFID-enabled bar code printers handle an inoperative tag by:
A. sending an error to the host.
B. printing 'void' or some other marking on the label.
C. ejecting the label.
D. ignoring it and continuing.
Answer: B

CompTIA   RF0-001 examen   certification RF0-001   RF0-001 examen   RF0-001

NO.7 A company wants to track personnel using RFID with a resolution within 10 feet (3.1 meters). Which of
the following RFID systems would provide the BEST results?
A. Active Real Time Locating System (RTLS)
B. Passive ultra high frequency (UHF) RFID system with hand-held interrogators
C. Passive high frequency (HF) RFID system with interrogators at entry points
D. Global Positioning System (GPS)
Answer: A

certification CompTIA   certification RF0-001   certification RF0-001   RF0-001   RF0-001

NO.8 When troubleshooting an interrogation zone, an operator observes that the interrogator is not
responding to external input or reading tags. The lights are on indicating it has power and network
connectivity. Which of the following would be the next step for the operator to take?
A. Replace the antenna cable.
B. Replace the interrogator.
C. Reboot the interrogator.
D. Reboot the antenna.
Answer: C

CompTIA examen   RF0-001   certification RF0-001   RF0-001

NO.9 Tags placed on small boxes uniformly stacked on a pallet are unreadable unless the pallet is rotated.
This is a symptom of tag:
A. propagation.
B. size.
C. shadowing.
D. polarity.
Answer: C

certification CompTIA   RF0-001   RF0-001 examen   RF0-001 examen   certification RF0-001

NO.10 When firmware upgrades become available, which of the following should the technician consider
FIRST?
A. How to install the upgrade.
B. When to schedule the upgrade.
C. Whether the upgrade can be downloaded from the internet.
D. The benefits of new upgrade.
Answer: D

CompTIA examen   RF0-001 examen   RF0-001   certification RF0-001

NO.11 Which of the following RFID tags would be BEST for inconspicuous tagging of assets containing a
maximum of eight bytes of data and are inductively coupled?
A. Active 433.92 MHz tag with strategically installed fixed interrogators.
B. Passive 13.56 MHz tag that is affixed to the asset and camouflaged requiring continuous loop
interrogation.
C. Passive Gen 2 tag requiring line of sight backscatter interrogation.
D. Active 433.92 MHz tag requiring modulated backscatter interrogation.
Answer: B

CompTIA   RF0-001   RF0-001

NO.12 In a facility with several automated print and apply printers, cases frequently get to the palletizer without
RFID labels. One way to correct this is to:
A. install an interrogation zone down stream from the labeler with a reject system.
B. have an interrogator on the palletizer.
C. use better quality labels.
D. use a hand-held interrogator to scan for missing labels at end of production line.
Answer: A

certification CompTIA   RF0-001   RF0-001

NO.13 Cases are going to be tagged and stored in a humid, high temperature area. Which of the following
types of labels would be needed?
A. Poly-coated with gum adhesive.
B. Direct thermal with gum adhesive.
C. Poly-coated with water base adhesive.
D. Paper with gum adhesive.
Answer: A

CompTIA   RF0-001   RF0-001 examen

NO.14 A new batch of tags is received for an existing system. When the new tags are introduced into the
system, the interrogation zones stop transmitting tag data. Which of the following is MOST likely the
source of the problem?
A. The new tags are all bad.
B. The new tags are the wrong type for the system.
C. A tag virus has been introduced by the new tags.
D. The interrogators have issued the kill command to the tags.
Answer: B

CompTIA   certification RF0-001   RF0-001   RF0-001 examen

NO.15 For a corrugated case filled with liquor bottles containing metal lids, all of the following locations are
acceptable for optimizing the performance of a passive high frequency (HF) RFID smart label EXCEPT on
the: (Select TWO).
A. side near the bottom where there is the most amount of liquid.
B. side near the top where there is the least amount of liquid.
C. bottom where there is the most amount of glass.
D. top near the metal lids.
Answer: AD

CompTIA   RF0-001   certification RF0-001

NO.16 All of the following are true of widely implemented "slap and ship" programs EXCEPT they:
A. make it difficult to optimize label application for the container.
B. are more susceptible to electrostatic discharge (ESD) than in-line automatic applicators.
C. are lower in cost than application in manufacturing.
D. are more likely to break the bond between the antenna and the chip.
Answer: C

CompTIA   certification RF0-001   RF0-001   certification RF0-001   RF0-001

NO.17 Loss of connection between an interrogator and the edgeware/middleware would result in which of the
following?
A. Only active RFID tag data would be processed.
B. No tag data would be processed.
C. Tag data would be sent directly to the Warehouse Management System (WMS).
D. Only interrogator status would be tracked.
Answer: B

CompTIA examen   RF0-001   certification RF0-001

NO.18 RFID media should be stored in:
A. electrostatic discharge (ESD) protected packaging.
B. metal containers.
C. rolls of ten.
D. the order that it was received.
Answer: A

CompTIA   RF0-001 examen   RF0-001   RF0-001

NO.19 It is important to know where an RFID inlay is located within a tag during printing because: (Select
TWO).
A. the inlay location directs the printer to print landscape or portrait.
B. the inlay sets the speed of the printer.
C. printing over the chip may cause damage.
D. timing from leading edge is critical to the encoding process.
Answer: CD

CompTIA   RF0-001   RF0-001 examen   RF0-001

NO.20 Ideally, as a tag passes though the antenna read window it should be:
A. inside metal foil.
B. on the same plane as the antenna.
C. at least 30 feet (9.3 meters) from the antenna.
D. facing away from antenna.
Answer: B

CompTIA   RF0-001 examen   certification RF0-001   RF0-001   RF0-001

Le test certification CompTIA RF0-001 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat CompTIA RF0-001 puisse augmenter la compétition dans ce marché.

Le meilleur matériel de formation examen CompTIA PD1-001 RF0-001 HT0-102 IK0-002 TK0-201 HT0-201 HT0-101

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification CompTIA PD1-001 RF0-001 HT0-102 IK0-002 TK0-201 HT0-201 HT0-101. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de PD1-001 RF0-001 HT0-102 IK0-002 TK0-201 HT0-201 HT0-101, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test CompTIA PD1-001 RF0-001 HT0-102 IK0-002 TK0-201 HT0-201 HT0-101. Ajoutez la Q&A au panier.

Est-ce que vous vous souciez encore de réussir le test CompTIA PD1-001 RF0-001 HT0-102 IK0-002 TK0-201 HT0-201 HT0-101? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test CompTIA PD1-001 RF0-001 HT0-102 IK0-002 TK0-201 HT0-201 HT0-101. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Le test CompTIA PD1-001 RF0-001 HT0-102 IK0-002 TK0-201 HT0-201 HT0-101 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test CompTIA PD1-001 RF0-001 HT0-102 IK0-002 TK0-201 HT0-201 HT0-101 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat CompTIA PD1-001 RF0-001 HT0-102 IK0-002 TK0-201 HT0-201 HT0-101 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test CompTIA PD1-001 RF0-001 HT0-102 IK0-002 TK0-201 HT0-201 HT0-101 avec l'aide de Pass4Test.

Le produit de Pass4Test peut assurer les candidats à réussir le test CompTIA PD1-001 RF0-001 HT0-102 IK0-002 TK0-201 HT0-201 HT0-101 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

Code d'Examen: PD1-001
Nom d'Examen: CompTIA (CompTIA PDI+ Beta Exam)
Questions et réponses: 861 Q&As

Code d'Examen: RF0-001
Nom d'Examen: CompTIA (RFID+ Certification)
Questions et réponses: 162 Q&As

Code d'Examen: HT0-102
Nom d'Examen: CompTIA (HTI+ Systems Infrastructure and Integration)
Questions et réponses: 220 Q&As

Code d'Examen: IK0-002
Nom d'Examen: CompTIA (I-NET+ CERTIFICATION)
Questions et réponses: 221 Q&As

Code d'Examen: TK0-201
Nom d'Examen: CompTIA (CTT+ Exam (Certified Technical Trainer))
Questions et réponses: 247 Q&As

Code d'Examen: HT0-201
Nom d'Examen: CompTIA (CEA-CompTIA DHTI+ Exam)
Questions et réponses: 250 Q&As

Code d'Examen: HT0-101
Nom d'Examen: CompTIA (HTI+ Residential Systems....)
Questions et réponses: 100 Q&As

TK0-201 Démo gratuit à télécharger: http://www.pass4test.fr/TK0-201.html

NO.1 Learners are MOST likely to learn a skill successfully when a topic is presented:
A. In a cluster with other, similar skills
B. Just in time for the learner to apply it
C. As part of a summary of related skills
D. As part of a review session prior to an examination
Answer: B

CompTIA examen   TK0-201   TK0-201   TK0-201 examen   certification TK0-201

NO.2 An instructor uses multiple forms of media to help the class understand a difficult topic. Unfortunately
learners are still having a hard time with the concept. Noticing difficulty, the instructor creates another
learning tool to explain the topic another way. Which of the following BEST describes the skill the
instructor is using?
A. Create opportunities for learners to contribute to the discussion
B. Plan and use a variety of reinforcement techniques during training
C. Adapt learning methods as intended by the course designers
D. Enhance, substitute or create media as appropriate
Answer: D

certification CompTIA   certification TK0-201   TK0-201   certification TK0-201

NO.3 An instructor asks an open-ended question to the class. Which of the following BEST describes the
skill the instructor is demonstrating?
A. Plan and use a variety of reinforcement techniques during training.
B. Elicit learner feedback on the adequacy of instructor responses.
C. Provide feedback that is specific to learners needs.
D. Create opportunities for learners to contribute to the discussion.
Answer: D

certification CompTIA   TK0-201   certification TK0-201   TK0-201

NO.4 An instructor has a class of learners who are required to attend. Most of the learners are not paying
attention or participating. Which of the following will increase the level of learner motivation?
A. Explain to the learners that the material is really interesting and they might want to pay attention.
B. Ask the learners if there is something more relevant they would prefer to learn.
C. Explain to the learners the skills they learn by taking this class could lead to career benefits.
D. Explain to the learners that they are only in class for a few days, and to make the best of it.
Answer: C

CompTIA   TK0-201   certification TK0-201

NO.5 Which of the following statements BEST describes the value of using a variety of question types during
instruction?
A. Regularly asking questions during a course helps to identify those that are paying attention.
B. Effective use of questions will enhance learners' conceptual understanding; encourage deep thinking
and meaningful participation.
C. Using a variety of questions during instruction prevents anyone in the group from becoming
disinterested with the same question types.
D. Questions asked often during a course will keep learners engaged, it is not important if they do not
know the correct answer.
Answer: B

CompTIA   TK0-201 examen   certification TK0-201   TK0-201   TK0-201

NO.6 Which of the following would be on an evaluation when seeking feedback concerning courseware
material used during a class?
A. Design of the courseware materials
B. Accuracy of the courseware
C. Cost of the courseware
D. Instructor's use of the courseware
Answer: B

certification CompTIA   TK0-201 examen   TK0-201 examen   certification TK0-201   certification TK0-201

NO.7 An instructor wants to demonstrate a technical topic that requires a certain procedure. Which of the
following is the BEST way to achieve this?
A. Have the learners brainstorm ideas on the topic.
B. Have the learners role play the topic.
C. Hold an open discussion on the topic.
D. Show the learners via a desktop sharing demonstration.
Answer: D

CompTIA examen   TK0-201   TK0-201

NO.8 Which of the following describes a form of feedback with the GREATEST positive impact?
A. Suggestions that focus on procedures versus the concepts
B. Measurable results from summative assessments
C. Specific comments on errors with suggestions on how to improve
D. Comparing learner performance with other learners
Answer: C

CompTIA   TK0-201   TK0-201 examen

NO.9 An instructor is preparing to start a class where several learners have arrived late due to bad weather.
The general mood of the learners is poor. Which of the following is the BEST way to handle this situation?
A. Use humor that will create a positive mood.
B. Tell the learners that the class will run late that day
C. Have the learners introduce themselves.
D. Proceed with the course material.
Answer: A

CompTIA examen   certification TK0-201   TK0-201   TK0-201 examen

NO.10 At the beginning of a training session, a trainer instructed the learners to use Brand X computers
because the instructional design assumes Brand X computers. Many learners objected. They felt that
since they will be using Brand Y computers at work, they should work on Brand Y computers in the room.
If the instructor needs to use Brand X computers to instruct, which of the following is the MOST
appropriate way to respond to the learners' need to be able to apply course materials to job
requirements?
A. First explain to the class how the materials apply to Brand X. and then do the same for Brand Y.
B. Do not mention either brand by name, but refer learners to the manual covering each of the respective
brands.
C. Provide a guide that relates Brand X to Brand Y computer functions
D. After providing the planned instruction on the Brand X computers, discuss differences that Brand Y
computers present to the user.
Answer: D

CompTIA   TK0-201   TK0-201 examen   TK0-201   TK0-201

NO.11 An instructor is conducting a virtual class and finds that several learners do not have computer systems
that actually meet the guidelines for the course. Due to this, certain required shared applications will not
work for them. Which of the following represents the BEST action for the instructor.?
A. Contact the course coordinator to remind learners of the requirements
B. Remove the sharing of applications as the entire class cannot participate.
C. Change the applications that are shared to ones that are compatible to all systems
D. Request the learners use systems that are compatible with the course.
Answer: D

CompTIA   TK0-201   TK0-201   TK0-201 examen   TK0-201

NO.12 A contract instructor has been hired to teach a course with twelve learners. After surveying the learners
it is identified that half of the class is not familiar with the subject being taught. Which of the following
should the instructor do to help the entire class achieve success?
A. Contact the training manager for suggestions on how to proceed.
B. Teach to the more experienced learners; the others will catch up.
C. Make the six learners that already know the material wait until the other learners catch up
D. Cancel the class and then divide the class into two difference courses.
Answer: A

CompTIA examen   TK0-201   TK0-201 examen   TK0-201   TK0-201

NO.13 The Human Resources department is conducting a class for new employees when the air conditioning
stops working. Which of the following should the instructor do FIRST?
A. Report the incident to the maintenance department
B. Tell the employees it is not unbearable and continue with the course
C. Cancel the class and reschedule the class for another time.
D. Continue on with the instruction ignoring the temperature issue.
Answer: A

CompTIA   certification TK0-201   certification TK0-201

NO.14 An instructor is conducting a review of written instructions and is aware that the preferred learning
style of one of the learners is kinesthetic. Which of the following is the BEST choice for the instructor?
A. Adjust the delivery of the review to include more graphs and charts as part of the exercise.
B. Administer an exam to verify learner's knowledge of the material.
C. Deliver the curriculum as defined in the documentation so that the rest of the class does not fall behind.
D. Adjust the delivery of the review to include a demonstration as part of the exercise.
Answer: D

certification CompTIA   certification TK0-201   TK0-201   TK0-201   TK0-201

NO.15 An instructor asks a question and a learner provides an incorrect answer that has nothing to do with the
question asked. Which of the following is the BEST response?
A. Ask another learner to provide an answer to the question.
B. Repeat the question exactly as originally stated.
C. Rephrase the question completely and ask it again.
D. Reprimand the learner for their response.
Answer: A

CompTIA   TK0-201   TK0-201 examen

NO.16 While facilitating a class an instructor uses a variety of questioning techniques. Which of the following
BEST describes the benefits?
A. Challenges learners, involves them and helps to monitor their progress.
B. Establishes an environment that supports learning, and maintains focus on meeting stated learning
objectives
C. Facilitates group dynamics in a positive way, while encouraging respectful interactions.
D. Keeps the learners engaged as to what is coming next and conveys the importance of their knowledge.
Answer: A

CompTIA   TK0-201 examen   TK0-201   TK0-201

NO.17 During a computer software training class the projector fails. Which of the following should the
instructor do FIRST?
A. Attempt to quickly fix the projector.
B. Move the class to another room.
C. Take a class break and find another projector.
D. Cancel the class and reschedule for a later date.
Answer: A

CompTIA examen   certification TK0-201   TK0-201   TK0-201   certification TK0-201   TK0-201 examen

NO.18 A company is preparing to roll-out a training course on advanced accounting skills. The company has
asked a contract instructor to facilitate the course. The instructor has no background in accounting. Which
of the following should the instructor do?
A. Ask to team teach the course with an expert
B. Accept the offer contingent upon six weeks of preparation time
C. Decline the offer based on lack of knowledge of accounting principles
D. Accept the offer and learn the content by observing accounting experts
Answer: C

CompTIA   TK0-201   TK0-201   certification TK0-201

NO.19 After a training class was completed, the instructor conducted several passive on the job observations
of each learner who attended the class. Which of the following is the primary benefit of the observations?
A. It measures the application of the skills taught.
B. It validates the quality of the course material.
C. It requires the learners to use what they learned.
D. It helps to reinforce the learning concepts.
Answer: A

certification CompTIA   TK0-201   TK0-201 examen   TK0-201   TK0-201 examen

NO.20 An instructor is leading a virtual class when several learners start having significant bandwidth issues
that cause them to drop out of the live session. Which of the following represents the BEST solution to the
problem?
A. Inform the learners that most of the same material will be covered in the next class session.
B. Have the learners watch a recorded session of the class.
C. Request that those learners with bandwidth issues be moved to an in-person live class,
D. Cancel the current session and schedule a make-up class.
Answer: B

CompTIA   certification TK0-201   certification TK0-201   TK0-201 examen

Dernières CompTIA RF0-001 examen pratique questions et réponses

Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A CompTIA RF0-001. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test CompTIA RF0-001 sans aucune doute.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test CompTIA RF0-001, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test CompTIA RF0-001 coûtant un peu d'argent.

Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat CompTIA RF0-001 est bien autorisé. Avec le certificat CompTIA RF0-001, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A CompTIA RF0-001.

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test CompTIA RF0-001, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Code d'Examen: RF0-001
Nom d'Examen: CompTIA (RFID+ Certification)
Questions et réponses: 162 Q&As

RF0-001 Démo gratuit à télécharger: http://www.pass4test.fr/RF0-001.html

NO.1 An Electronic Product Code (EPC) Class 1 Gen 2 RFID system reads the EPC data from memory bank
zero, but the 64-bit EPC code is always zero. Which of the following is MOST likely the cause of the
problem?
A. The EPC code is stored in Bank 1.
B. The tag has been killed.
C. The EPC code was never written to the tag.
D. The access password is zero.
Answer: A

CompTIA   RF0-001   RF0-001   certification RF0-001   RF0-001   certification RF0-001

NO.2 RFID media should be stored in:
A. electrostatic discharge (ESD) protected packaging.
B. metal containers.
C. rolls of ten.
D. the order that it was received.
Answer: A

CompTIA   RF0-001   RF0-001   RF0-001   RF0-001 examen

NO.3 Which of the following RFID tags would be BEST for inconspicuous tagging of assets containing a
maximum of eight bytes of data and are inductively coupled?
A. Active 433.92 MHz tag with strategically installed fixed interrogators.
B. Passive 13.56 MHz tag that is affixed to the asset and camouflaged requiring continuous loop
interrogation.
C. Passive Gen 2 tag requiring line of sight backscatter interrogation.
D. Active 433.92 MHz tag requiring modulated backscatter interrogation.
Answer: B

CompTIA examen   RF0-001   RF0-001   RF0-001

NO.4 A new batch of tags is received for an existing system. When the new tags are introduced into the
system, the interrogation zones stop transmitting tag data. Which of the following is MOST likely the
source of the problem?
A. The new tags are all bad.
B. The new tags are the wrong type for the system.
C. A tag virus has been introduced by the new tags.
D. The interrogators have issued the kill command to the tags.
Answer: B

CompTIA examen   RF0-001   RF0-001 examen

NO.5 In a facility with several automated print and apply printers, cases frequently get to the palletizer without
RFID labels. One way to correct this is to:
A. install an interrogation zone down stream from the labeler with a reject system.
B. have an interrogator on the palletizer.
C. use better quality labels.
D. use a hand-held interrogator to scan for missing labels at end of production line.
Answer: A

CompTIA   certification RF0-001   certification RF0-001   RF0-001 examen

NO.6 It is important to know where an RFID inlay is located within a tag during printing because: (Select
TWO).
A. the inlay location directs the printer to print landscape or portrait.
B. the inlay sets the speed of the printer.
C. printing over the chip may cause damage.
D. timing from leading edge is critical to the encoding process.
Answer: CD

certification CompTIA   RF0-001   certification RF0-001   RF0-001 examen   RF0-001 examen

NO.7 Ideally, as a tag passes though the antenna read window it should be:
A. inside metal foil.
B. on the same plane as the antenna.
C. at least 30 feet (9.3 meters) from the antenna.
D. facing away from antenna.
Answer: B

CompTIA   certification RF0-001   certification RF0-001

NO.8 A company wants to track personnel using RFID with a resolution within 10 feet (3.1 meters). Which of
the following RFID systems would provide the BEST results?
A. Active Real Time Locating System (RTLS)
B. Passive ultra high frequency (UHF) RFID system with hand-held interrogators
C. Passive high frequency (HF) RFID system with interrogators at entry points
D. Global Positioning System (GPS)
Answer: A

CompTIA   RF0-001   RF0-001   RF0-001   RF0-001 examen

NO.9 Which of the following materials have absorptive properties in relation to ultra high frequency (UHF)?
(Select TWO).
A. Damp cardboard
B. Glass
C. Conductive liquids
D. Metal
Answer: AC

CompTIA   RF0-001   certification RF0-001   RF0-001   certification RF0-001

NO.10 While troubleshooting an interrogation zone, a technician discovers that the antenna wires have torn
free of their connectors. Which of the following would be the FIRST step for the technician to take?
A. Secure the cables so they cannot tear free again.
B. Crimp a new end on the cable.
C. Power down the interrogator.
D. Attach the repaired cable to the antenna.
Answer: C

CompTIA examen   RF0-001   RF0-001 examen   RF0-001

NO.11 For a corrugated case filled with liquor bottles containing metal lids, all of the following locations are
acceptable for optimizing the performance of a passive high frequency (HF) RFID smart label EXCEPT on
the: (Select TWO).
A. side near the bottom where there is the most amount of liquid.
B. side near the top where there is the least amount of liquid.
C. bottom where there is the most amount of glass.
D. top near the metal lids.
Answer: AD

CompTIA   certification RF0-001   RF0-001 examen   RF0-001 examen

NO.12 Which of the following technologies would provide the BEST read range when attached to a
corrugated metal freight container that is 40 feet (12.4 meters)?
A. Passive 13.56 MHz from a one watt interrogator/antenna
B. Passive 860 - 960 MHz from a 4 watt interrogator/antenna C. Active 433.92 MHz, operating at 10 mW
D. Active 2450 MHz, operating at 10 mW
Answer: C

CompTIA examen   RF0-001 examen   RF0-001   certification RF0-001   RF0-001 examen   RF0-001

NO.13 Desktop industrial RFID-enabled bar code printers handle an inoperative tag by:
A. sending an error to the host.
B. printing 'void' or some other marking on the label.
C. ejecting the label.
D. ignoring it and continuing.
Answer: B

CompTIA examen   certification RF0-001   RF0-001   RF0-001

NO.14 Cases are going to be tagged and stored in a humid, high temperature area. Which of the following
types of labels would be needed?
A. Poly-coated with gum adhesive.
B. Direct thermal with gum adhesive.
C. Poly-coated with water base adhesive.
D. Paper with gum adhesive.
Answer: A

CompTIA   RF0-001   RF0-001 examen   RF0-001 examen   certification RF0-001

NO.15 All of the following are true of widely implemented "slap and ship" programs EXCEPT they:
A. make it difficult to optimize label application for the container.
B. are more susceptible to electrostatic discharge (ESD) than in-line automatic applicators.
C. are lower in cost than application in manufacturing.
D. are more likely to break the bond between the antenna and the chip.
Answer: C

certification CompTIA   RF0-001 examen   RF0-001 examen

NO.16 Which of the following conditions would be MOST likely to cause a ghost tag read?
A. The interrogator did not pass electronic product code (EPC) compliance testing.
B. There is a broken strap between the chip and the antenna on the tag.
C. There are too many tags within an interrogator zone.
D. There is RF interference in an interrogator zone.
Answer: D

certification CompTIA   certification RF0-001   RF0-001

NO.17 When firmware upgrades become available, which of the following should the technician consider
FIRST?
A. How to install the upgrade.
B. When to schedule the upgrade.
C. Whether the upgrade can be downloaded from the internet.
D. The benefits of new upgrade.
Answer: D

CompTIA   RF0-001   RF0-001 examen   RF0-001

NO.18 Loss of connection between an interrogator and the edgeware/middleware would result in which of the
following?
A. Only active RFID tag data would be processed.
B. No tag data would be processed.
C. Tag data would be sent directly to the Warehouse Management System (WMS).
D. Only interrogator status would be tracked.
Answer: B

CompTIA examen   RF0-001 examen   RF0-001   RF0-001

NO.19 Tags placed on small boxes uniformly stacked on a pallet are unreadable unless the pallet is rotated.
This is a symptom of tag:
A. propagation.
B. size.
C. shadowing.
D. polarity.
Answer: C

CompTIA   RF0-001   RF0-001 examen   RF0-001   RF0-001

NO.20 When troubleshooting an interrogation zone, an operator observes that the interrogator is not
responding to external input or reading tags. The lights are on indicating it has power and network
connectivity. Which of the following would be the next step for the operator to take?
A. Replace the antenna cable.
B. Replace the interrogator.
C. Reboot the interrogator.
D. Reboot the antenna.
Answer: C

CompTIA examen   RF0-001   RF0-001   certification RF0-001

Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.

Pass4Test offre une formation sur CompTIA RF0-001 matériaux examen

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.

Pass4Test a de formations plus nouvelles pour le test CompTIA RF0-001. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test CompTIA RF0-001 à tous les candidats qui nous choisissent. L'importance de Certification CompTIA RF0-001 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.

Certification CompTIA RF0-001 est un des tests plus importants dans le système de Certification CompTIA. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test CompTIA RF0-001 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.

Code d'Examen: RF0-001
Nom d'Examen: CompTIA (RFID+ Certification)
Questions et réponses: 162 Q&As

Le Certificat CompTIA RF0-001 est un passport rêvé par beaucoup de professionnels IT. Le test CompTIA RF0-001 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test CompTIA RF0-001. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test CompTIA RF0-001 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A CompTIA RF0-001 pour prendre un essai.

C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Pass4Test vous offre un choix meilleur pour faire votre préparation de test CompTIA RF0-001 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de CompTIA RF0-001 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test CompTIA RF0-001 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

RF0-001 Démo gratuit à télécharger: http://www.pass4test.fr/RF0-001.html

NO.1 RFID media should be stored in:
A. electrostatic discharge (ESD) protected packaging.
B. metal containers.
C. rolls of ten.
D. the order that it was received.
Answer: A

CompTIA examen   RF0-001   certification RF0-001   RF0-001 examen

NO.2 Which of the following conditions would be MOST likely to cause a ghost tag read?
A. The interrogator did not pass electronic product code (EPC) compliance testing.
B. There is a broken strap between the chip and the antenna on the tag.
C. There are too many tags within an interrogator zone.
D. There is RF interference in an interrogator zone.
Answer: D

CompTIA   RF0-001   RF0-001 examen

NO.3 Which of the following RFID tags would be BEST for inconspicuous tagging of assets containing a
maximum of eight bytes of data and are inductively coupled?
A. Active 433.92 MHz tag with strategically installed fixed interrogators.
B. Passive 13.56 MHz tag that is affixed to the asset and camouflaged requiring continuous loop
interrogation.
C. Passive Gen 2 tag requiring line of sight backscatter interrogation.
D. Active 433.92 MHz tag requiring modulated backscatter interrogation.
Answer: B

CompTIA examen   RF0-001   certification RF0-001

NO.4 While troubleshooting an interrogation zone, a technician discovers that the antenna wires have torn
free of their connectors. Which of the following would be the FIRST step for the technician to take?
A. Secure the cables so they cannot tear free again.
B. Crimp a new end on the cable.
C. Power down the interrogator.
D. Attach the repaired cable to the antenna.
Answer: C

CompTIA   RF0-001   certification RF0-001   certification RF0-001   certification RF0-001   RF0-001

NO.5 In a facility with several automated print and apply printers, cases frequently get to the palletizer without
RFID labels. One way to correct this is to:
A. install an interrogation zone down stream from the labeler with a reject system.
B. have an interrogator on the palletizer.
C. use better quality labels.
D. use a hand-held interrogator to scan for missing labels at end of production line.
Answer: A

CompTIA   RF0-001   RF0-001

NO.6 Cases are going to be tagged and stored in a humid, high temperature area. Which of the following
types of labels would be needed?
A. Poly-coated with gum adhesive.
B. Direct thermal with gum adhesive.
C. Poly-coated with water base adhesive.
D. Paper with gum adhesive.
Answer: A

CompTIA examen   certification RF0-001   RF0-001   RF0-001

NO.7 When troubleshooting an interrogation zone, an operator observes that the interrogator is not
responding to external input or reading tags. The lights are on indicating it has power and network
connectivity. Which of the following would be the next step for the operator to take?
A. Replace the antenna cable.
B. Replace the interrogator.
C. Reboot the interrogator.
D. Reboot the antenna.
Answer: C

CompTIA   RF0-001   certification RF0-001   certification RF0-001

NO.8 Tags placed on small boxes uniformly stacked on a pallet are unreadable unless the pallet is rotated.
This is a symptom of tag:
A. propagation.
B. size.
C. shadowing.
D. polarity.
Answer: C

CompTIA   RF0-001 examen   certification RF0-001

NO.9 An Electronic Product Code (EPC) Class 1 Gen 2 RFID system reads the EPC data from memory bank
zero, but the 64-bit EPC code is always zero. Which of the following is MOST likely the cause of the
problem?
A. The EPC code is stored in Bank 1.
B. The tag has been killed.
C. The EPC code was never written to the tag.
D. The access password is zero.
Answer: A

CompTIA   RF0-001 examen   RF0-001   RF0-001   RF0-001

NO.10 A new batch of tags is received for an existing system. When the new tags are introduced into the
system, the interrogation zones stop transmitting tag data. Which of the following is MOST likely the
source of the problem?
A. The new tags are all bad.
B. The new tags are the wrong type for the system.
C. A tag virus has been introduced by the new tags.
D. The interrogators have issued the kill command to the tags.
Answer: B

CompTIA examen   RF0-001   certification RF0-001   RF0-001   RF0-001   RF0-001

NO.11 For a corrugated case filled with liquor bottles containing metal lids, all of the following locations are
acceptable for optimizing the performance of a passive high frequency (HF) RFID smart label EXCEPT on
the: (Select TWO).
A. side near the bottom where there is the most amount of liquid.
B. side near the top where there is the least amount of liquid.
C. bottom where there is the most amount of glass.
D. top near the metal lids.
Answer: AD

CompTIA   RF0-001   RF0-001   RF0-001 examen   RF0-001 examen   certification RF0-001

NO.12 Which of the following materials have absorptive properties in relation to ultra high frequency (UHF)?
(Select TWO).
A. Damp cardboard
B. Glass
C. Conductive liquids
D. Metal
Answer: AC

CompTIA examen   RF0-001   RF0-001

NO.13 When firmware upgrades become available, which of the following should the technician consider
FIRST?
A. How to install the upgrade.
B. When to schedule the upgrade.
C. Whether the upgrade can be downloaded from the internet.
D. The benefits of new upgrade.
Answer: D

CompTIA   RF0-001   RF0-001   RF0-001 examen

NO.14 A company wants to track personnel using RFID with a resolution within 10 feet (3.1 meters). Which of
the following RFID systems would provide the BEST results?
A. Active Real Time Locating System (RTLS)
B. Passive ultra high frequency (UHF) RFID system with hand-held interrogators
C. Passive high frequency (HF) RFID system with interrogators at entry points
D. Global Positioning System (GPS)
Answer: A

CompTIA   RF0-001 examen   certification RF0-001   RF0-001 examen   certification RF0-001

NO.15 Loss of connection between an interrogator and the edgeware/middleware would result in which of the
following?
A. Only active RFID tag data would be processed.
B. No tag data would be processed.
C. Tag data would be sent directly to the Warehouse Management System (WMS).
D. Only interrogator status would be tracked.
Answer: B

CompTIA   RF0-001 examen   certification RF0-001   RF0-001   RF0-001   RF0-001 examen

NO.16 It is important to know where an RFID inlay is located within a tag during printing because: (Select
TWO).
A. the inlay location directs the printer to print landscape or portrait.
B. the inlay sets the speed of the printer.
C. printing over the chip may cause damage.
D. timing from leading edge is critical to the encoding process.
Answer: CD

CompTIA   certification RF0-001   RF0-001   RF0-001 examen   RF0-001

NO.17 All of the following are true of widely implemented "slap and ship" programs EXCEPT they:
A. make it difficult to optimize label application for the container.
B. are more susceptible to electrostatic discharge (ESD) than in-line automatic applicators.
C. are lower in cost than application in manufacturing.
D. are more likely to break the bond between the antenna and the chip.
Answer: C

CompTIA examen   RF0-001   RF0-001 examen   RF0-001   RF0-001

NO.18 Desktop industrial RFID-enabled bar code printers handle an inoperative tag by:
A. sending an error to the host.
B. printing 'void' or some other marking on the label.
C. ejecting the label.
D. ignoring it and continuing.
Answer: B

CompTIA examen   RF0-001   RF0-001 examen   RF0-001 examen   certification RF0-001

NO.19 Ideally, as a tag passes though the antenna read window it should be:
A. inside metal foil.
B. on the same plane as the antenna.
C. at least 30 feet (9.3 meters) from the antenna.
D. facing away from antenna.
Answer: B

CompTIA   certification RF0-001   RF0-001 examen

NO.20 Which of the following technologies would provide the BEST read range when attached to a
corrugated metal freight container that is 40 feet (12.4 meters)?
A. Passive 13.56 MHz from a one watt interrogator/antenna
B. Passive 860 - 960 MHz from a 4 watt interrogator/antenna C. Active 433.92 MHz, operating at 10 mW
D. Active 2450 MHz, operating at 10 mW
Answer: C

CompTIA   certification RF0-001   RF0-001   certification RF0-001   RF0-001

Le test CompTIA RF0-001 est l'un très improtant dans tous les tests de Certification CompTIA, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

Le plus récent matériel de formation CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002.

Est-ce que vous vous souciez encore pour passer le test CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.

Pass4Test est un bon site d'offrir la facilité aux candidats de test CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002. Selon les anciens test, l'outil de formation CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002 est bien proche de test réel.

Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002 à la première fois.

Code d'Examen: PD0-001

Nom d'Examen: CompTIA (CompTIA PDI+ Beta Exam)

Questions et réponses: 861 Q&As

Code d'Examen: SY0-101

Nom d'Examen: CompTIA (SECURITY+ CERTIFICATION)

Questions et réponses: 340 Q&As

Code d'Examen: PD1-001

Nom d'Examen: CompTIA (CompTIA PDI+ Beta Exam)

Questions et réponses: 861 Q&As

Code d'Examen: RF0-001

Nom d'Examen: CompTIA (RFID+ Certification)

Questions et réponses: 162 Q&As

Code d'Examen: HT0-102

Nom d'Examen: CompTIA (HTI+ Systems Infrastructure and Integration)

Questions et réponses: 220 Q&As

Code d'Examen: IK0-002

Nom d'Examen: CompTIA (I-NET+ CERTIFICATION)

Questions et réponses: 221 Q&As

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002.

Le Certificat de CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002, c'est-à-dire avoir une grande fortune. Le Certificat CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002 peut bien tester des connaissances professionnelles IT. La Q&A CompTIA PD0-001 SY0-101 PD1-001 RF0-001 HT0-102 IK0-002 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

PD0-001 Démo gratuit à télécharger: http://www.pass4test.fr/PD0-001.html

NO.1 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B

CompTIA examen   PD0-001   certification PD0-001   PD0-001   certification PD0-001

NO.2 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D

certification CompTIA   PD0-001 examen   PD0-001

NO.3 Which of the following items can be used as a discharge lamp?
A.Halogen lamp
B.Light Emitting Diodes (LED)
C.Fuser lamp
D.Cleaning roller
Answer: B

CompTIA   PD0-001   PD0-001 examen   certification PD0-001   PD0-001 examen

NO.4 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B

CompTIA   PD0-001 examen   PD0-001   PD0-001 examen   PD0-001

NO.5 When arriving at the customers location, two different users describe the problem, and from their
description it seems to be two separate problems. Which of the following is an appropriate step to take?
A.Ignore both of them and decide what the real problem is.
B.Set up a separate call for each problem.
C.Have them duplicate the problem at the device.
D.Ask a third person and see if the problem is the same thing.
Answer: C

CompTIA examen   certification PD0-001   certification PD0-001

NO.6 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A

certification CompTIA   PD0-001   certification PD0-001   PD0-001   PD0-001

NO.7 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A

CompTIA   PD0-001 examen   PD0-001

NO.8 When onsite repairing a printer the technicians cell phone rings and it is a personal call, how should
the technician handle this?
A.Answer the call and talk to your friend at the customer site.
B.Answer the call and tell the friend you will call them later.
C.Let it go to voicemail, call them back between service calls.
D.Let it ring and call the friend back when the customer leaves.
Answer: C

CompTIA   certification PD0-001   PD0-001   certification PD0-001   PD0-001

NO.9 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C

CompTIA examen   PD0-001   certification PD0-001   PD0-001   PD0-001 examen

NO.10 Scheduled preventative maintenance visits should be carried out:
A.after two unplanned service calls.
B.according to manufacturers specifications.
C.when the device is becoming unreliable.
D.every sixty days.
Answer: B

CompTIA examen   PD0-001 examen   PD0-001   PD0-001 examen

NO.11 Which of the following failed components would be responsible for the fuser unit not heating properly?
A.Halogen lamps
B.Ball bearing
C.Hot roller
D.Pressure roller
Answer: A

CompTIA   PD0-001   certification PD0-001   PD0-001

NO.12 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D

CompTIA examen   certification PD0-001   PD0-001   certification PD0-001

NO.13 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A

CompTIA   PD0-001 examen   PD0-001 examen   PD0-001 examen   PD0-001 examen   PD0-001

NO.14 Which of the following types of media would MOST likely cause above normal amounts of machine
jamming?
A.Envelopes
B.Colored media
C.Letterhead
D.Pre punched
Answer: A

CompTIA   PD0-001 examen   certification PD0-001   PD0-001 examen   PD0-001 examen

NO.15 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D

CompTIA   PD0-001   PD0-001 examen

NO.16 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D

CompTIA examen   certification PD0-001   PD0-001   PD0-001   PD0-001 examen   PD0-001

NO.17 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A

CompTIA   PD0-001 examen   PD0-001   PD0-001   PD0-001 examen

NO.18 How should a service representative provide closure at the end of a call for a client?
A.Explain the issues of the call, the steps taken to resolve them and query the client if they have any
additional needs.
B.Explain the solution to the issue and then provide the client with the technicians contact information in
case they have any questions.
C.Give the client a technical explanation on the issue and how it was fixed; throw any faulty equipment in
the clients garbage.
D.Proceed to the next service call, check back with the client in a week to see if they have any additional
needs.
Answer: A

CompTIA examen   PD0-001 examen   certification PD0-001   PD0-001

NO.19 Which of the following type of lamp is used for heating a fuser?
A.Xenon
B.Halogen
C.Incandescent
D.Light Emitting Diode
Answer: B

CompTIA   certification PD0-001   PD0-001 examen   PD0-001   certification PD0-001

NO.20 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A

CompTIA examen   certification PD0-001   PD0-001   PD0-001 examen   certification PD0-001

NO.21 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE

CompTIA examen   certification PD0-001   PD0-001   PD0-001   PD0-001

NO.22 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B

certification CompTIA   PD0-001   PD0-001   PD0-001   PD0-001

NO.23 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B

CompTIA examen   certification PD0-001   PD0-001 examen

NO.24 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D

CompTIA   PD0-001   PD0-001   PD0-001 examen   certification PD0-001

NO.25 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B

certification CompTIA   PD0-001   PD0-001

NO.26 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C

certification CompTIA   certification PD0-001   PD0-001 examen   PD0-001   certification PD0-001

NO.27 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A

CompTIA   PD0-001   PD0-001 examen   certification PD0-001   PD0-001 examen

NO.28 Which of the following is the FIRST step a technician should take when troubleshooting a device
issue?
A.Gather information from the customer.
B.Isolate the problem on the device.
C.Read the service documentation for possible causes.
D.Check the parts life counters.
Answer: A

certification CompTIA   PD0-001 examen   PD0-001   PD0-001 examen

NO.29 Which of the following devices can route electrical signals only when activated by an external control
signal?
A.Solenoid
B.Relay
C.Clutch
D.Capacitor
Answer: B

CompTIA   PD0-001   PD0-001   certification PD0-001

NO.30 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C

CompTIA   certification PD0-001   PD0-001   PD0-001