Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.
Est-que vous s'inquiétez encore à passer le test Certification HP2-T28 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de HP HP2-T28? Si vous voulez réussir le test HP HP2-T28 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.
Finalement, la Q&A HP HP2-T28 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test HP HP2-T28 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification HP, vous aurez un meilleur salaire et une plus grande space à se développer.
Code d'Examen: HP5-K03D
Nom d'Examen: HP (Delta - Supporting and Servicing HP 3PAR StoreServ Solutions)
Questions et réponses: 30 Q&As
Code d'Examen: HP2-T28
Nom d'Examen: HP (HP BladeSystem Administration)
Questions et réponses: 55 Q&As
Le test de Certification HP HP2-T28 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.
Passer le test HP HP5-K03D, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification HP HP5-K03D. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification HP HP5-K03D.
HP5-K03D Démo gratuit à télécharger: http://www.pass4test.fr/HP5-K03D.html
NO.1 Your customer has an existing HP 3PAR F400 array with two controller nodes and eight DC3
disk enclosures Each DC3 disk enclosure is fully populated with 300GB 15k disk drives.
The customer has purchased a new HP 3PAR StoreServ 7400 two-node system with five additional
drive enclosures to be installed in a second data center. This system is fully populated with 450GB
10k drives. Data will be migrated from the F400 to the 7400 by using Remote Copy Fibre Channel
(RCFC). The 7400 will then become the primary system, but data will continue to be replicated
between the systems. Additionally, the customer has ordered extra 8GB/S FC adapters for the new
7400.
What is the maximum number of configurable host ports on the new HP StoreServ 7400 array in the
customer environment?
A. 4
B. 8
C. 10
D. 12
Answer: D
HP certification HP5-K03D HP5-K03D examen HP5-K03D examen certification HP5-K03D
5. Your customer has an existing HP 3PAR F400 array with two controller nodes and eight DC3
disk enclosures. Each DC3 disk enclosure is fully populated with 300GB 15k disk drives.
The customer has purchased a new HP 3PAR StoreServ 7400 two-node system with five additional
drive enclosures to be installed in a second data center. This system is fully populated with 450GB
10k drives Data will be migrated from the F400 to the 7400 by using Remote Copy Fibre Channel
(RCFC). The 7400 will then become the primary system, but data will continue to be replicated
between the systems. Additionally, the customer has ordered extra 8GB/s FC adapters for the new
7400.
During the installation you record these serial numbers for the new HP 3PAR StoreServ system:
HP serial number CZ32439658
3PAR serial number 1628580
Which SPID is assigned during the installation?
A. SP0001628580
B. SP32439658
C. 1628580
D. 00032439658
Answer: A
certification HP HP5-K03D certification HP5-K03D
Reference:http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03603825 /c036038
2 5.pdf(page 7, second bullet)
6. Which statements are true about the HP 3PAR StoreServ 7000? (Select two.)
A. Within a column, there can be empty slots between drives.
B. Columns of drives must be of the same drive type and rotational speed for HDDs.
C. Drives must be added in identical pairs.
D. The LFF enclosure cannot be mixed with the SFF enclosure on the same node pair,
E. All columns have to contain the same number of drives.
Answer: B,C
HP examen HP5-K03D examen HP5-K03D certification HP5-K03D
7. Your customer plans to build a two-tier architecture with one HP 3PAR StoreServ 7400. Layer 1
should be the SSD Tier, and Layer 2 should be the Fast Class Tier. After the SmartStart configuration
is complete, the customer connects to the system through the InformOS Management Console.
Which default CPGs are created during the process of initializing the storage system?
A. SSD RAID 1 and 5: Fast Class 1 and 6 default CPGs
B. SSD RAID 1 and 5: Fast Class 1 and 5 default CPGs
C. SSD RAID 1,5,and 6; Fast Class 1 and 6 default CPGs
D. SSD RAID 1 and 5 FastClass 1,5 and 6 default CPGs
Answer: A
HP examen certification HP5-K03D HP5-K03D examen
NO.2 What must be done prior to running HP 3PAR SmartStart?
A. The service laptop needs to be connected to the StoreServ system.
B. The Service Processor and StoreServ system must be connected to the same subnet
C. An installation service call must be placed with HP Central,
D. A zone must be created between the StoreServ system and the Service Processor.
Answer: B
certification HP certification HP5-K03D HP5-K03D examen HP5-K03D examen
NO.3 A customer has an existing c70fJ0 enclosure, with 6 blades and FlexFabric modules. You have
been asked to install 5 additional blades for a virtualization project. The customer requires shared
storage for a Hyper-V cluster.
Their existing storage infrastructure is 1Gb iSCSI.
What would be the most cost-effective method for adding a new 3PAR storage?
A. Directly attach the FC Host ports of the c7000.
B. Install SAN Switch Modules in the c7000.
C. Install two Brocade 8 / 8 SAN Switches
D. Upgrade the network switches to 10GB
Answer: A
HP examen HP5-K03D examen certification HP5-K03D
NO.4 A customer has three HP 3PAR StoreServ 10000 systems in different sites on their
metropolitan campus The FC-based SANs within the different sites consist of B-series 8 Gbps
switches with an active port-based zoning. Between the sites, there is a 10 Gbps Ethernet
connection.
Which remote copy configuration should you recommend?
A. N-to-1 Configuration
B. Synchronous Long Distance Configuration
C. Unidirectional 1-to-1 Configuration
D. 1-to-N Configuration
