Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test Microsoft 70-672 à la première fois.
Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Microsoft 70-483, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Microsoft 70-483. Peut-être d'obtenir le Certificat Microsoft 70-483 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
La population de la Certification Microsoft 070-683 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.
Pass4Test vous promet de vous aider à passer le test Microsoft 070-683, vous pouvez télécharger maintenant les Q&As partielles de test Microsoft 070-683 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.
Code d'Examen: 70-672
Nom d'Examen: Microsoft (Design and Providing MS Vol Licensing Solutions to Large Orgs)
Questions et réponses: 127 Q&As
Code d'Examen: 70-483
Nom d'Examen: Microsoft (Programming in C#)
Questions et réponses: 214 Q&As
Code d'Examen: 070-683
Nom d'Examen: Microsoft (TS: Windows 7, Preinstalling for OEMs )
Questions et réponses: 87 Q&As
Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Microsoft 070-683. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Microsoft 070-683.
Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test Microsoft 70-483, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat Microsoft 70-483. Vous aurez une space plus grande à se développer.
070-683 Démo gratuit à télécharger: http://www.pass4test.fr/070-683.html
NO.1 You prepare a Windows 7 image. You need to ensure that the system clock is automatically set to the
Central Time (UTC -6.00) time zone when the image is deployed. Your solution must prevent time zone
customizations during Windows Welcome. What should you do?
A.On the reference computer, modify the Time Zone. Generalize and capture the image.
B.Generalize and capture the image. Create an Oobe.xml file that specifies the time zone.
C.Generalize and capture the image. Create a Winpeshl.ini file that specifies the time zone.
D.On the reference computer, run Dism.exe and specify the /set-timezone parameter. Generalize and
capture the image.
Answer: B
certification Microsoft 070-683 examen 070-683 070-683 certification 070-683
NO.2 You deploy a generalized image on a computer. You need to start Windows 7 on the computer. Your
solution must prevent Windows Welcome from completing. What should you do?
A.Start the computer, and then press SHIFT+F10.
B.Start the computer, and then press CTRL+SHIFT+F3.
C.Start the computer from the Windows 7 installation media, and then select Repair computer.
D.Start the computer from Windows PE, and then run Dism.exe and specify the /add-package parameter.
Answer: B
Microsoft examen 070-683 examen certification 070-683 070-683 examen
NO.3 You are preparing a Windows 7 image. You install several out-of-box drivers. You plan to generalize the
image, and then deploy the image to computers that have the exact same hardware as the reference
computer. You need to ensure that when the image is deployed, that hardware devices are not
re-detected during the specialize configuration pass. What should you do before you generalize the
computer?
A.Set the DriverPaths value in the Oobe.xml file.
B.Set the DriverPaths value in the Unattend.xml file.
C.Set the PersistAllDeviceInstalls value in the Oobe.xml file.
D.Set the PersistAllDeviceInstalls value in the Unattend.xml file.
Answer: D
Microsoft certification 070-683 070-683 examen
NO.4 You have a computer that runs Windows 7. You start a capture of the computer to an image and get the
following error message. The process cannot access the file because it is being used by another process.
You need to create an image of the computer. What should you do before you capture the image?
A.Disable the paging file.
B.Stop the Windows Search service.
C.Start the command prompt by using elevated privileges.
D.Start the Computer by using Windows Preinstallation Environment (Windows PE).
Answer: D
Microsoft examen 070-683 examen 070-683 examen certification 070-683 070-683 examen
NO.5 You mount a Windows 7 image. You need to add a text file to the image. Which tool should you use?
A.Dism.exe
B.ImageX.exe
C.Windows Explorer
D.Windows System Image Manager
Answer: C
Microsoft 070-683 examen 070-683 examen
NO.6 You have a Windows 7 image. You mount the image, add additional files to the image, and then
successfully unmount the image. You notice that the additional files are not in the image. You need to
ensure that the additional files are saved in the image. What should you do?
A.Run imagex.exe and specify the /mount parameter.
B.Run imagex.exe and specify the /commit parameter.
C.Run dism.exe and specify the /scratchdir parameter.
D.Run dism.exe and specify the /cleanup-wim parameter.
Answer: B
Microsoft examen 070-683 070-683
NO.7 You attempt to capture an image to a Windows Deployment Services (WDS) server as shown in the
exhibit. (Click the Exhibit button.) You need to capture the image to the WDS server. What should you do?
A.Start the reference computer from Windows Preinstallation Environment (Windows PE), and then run
sysprep.exe /audit. Restart the computer by using Pre-Boot eXecution Environment (PXE).
B.Start the reference computer from Windows Preinstallation Environment (Windows PE), and then run
sysprep.exe /generalize. Restart the computer by using Pre-Boot eXecution Environment (PXE).
C.Start Windows 7 on the reference computer, and then run sysprep.exe /audit. Restart the computer by
using Pre-Boot eXecution Environment (PXE).
D.Start Windows 7 on the reference computer, and then run sysprep.exe /generalize. Restart the
computer by using Pre-Boot eXecution Environment (PXE).
Answer: D
Microsoft examen certification 070-683 certification 070-683 certification 070-683 070-683 examen
NO.8 You deploy a generalized image of Windows 7 to a computer. You start the computer in audit mode.
You need to ensure that Windows Welcome runs when you restart the computer. What should you do?
A.Start the computer, and then press F12.
B.Start the computer, and then press CTRL+SHIFT+F3.
C.Run Sysprep.exe and specify the /oobe parameter.
D.Run Dism.exe and specify the /cleanup-image parameter.
Answer: C
certification Microsoft 070-683 examen 070-683 examen 070-683 examen certification 070-683
没有评论:
发表评论