La Q&A Foundry Network FN0-100 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification Foundry Network FN0-100.
Pass4Test est un site à offrir particulièrement la Q&A Foundry Network FN0-100, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification Foundry Network FN0-100, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test Foundry Network FN0-100 et même se renforcer vos connaissances professionnelles IT.
La partie plus nouvelle de test Certification Foundry Network FN0-100 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel Foundry Network FN0-100. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.
Code d'Examen: FN0-100
Nom d'Examen: Foundry Network (Foundry Networks CNE)
Questions et réponses: 82 Q&As
But que Pass4Test n'offre que les produits de qualité est pour vous aider à réussir le test Foundry Network FN0-100 100%. Le test simulation offert par Pass4Test est bien proche de test réel. Si vous ne pouvez pas passer le test Foundry Network FN0-100, votre argent sera tout rendu.
FN0-100 Démo gratuit à télécharger: http://www.pass4test.fr/FN0-100.html
NO.1 What is the difference between TACACS+ and TACACS?
A. TACACS is an enhancement to TACACS+
B. TACACS is TCP based and TACACS+ is UDP based
C. TACACS+ provides encryption and uses TCP.
Answer: C
Foundry Network certification FN0-100 FN0-100
NO.2 Which of the following are true regarding the highest priority queue on Foundry
chassis devices?
A. qosp0 ?This queue corresponds to 802.1p prioritization levels 0 and 1 and Foundry
priority levels 0 and 1.
B. qosp0 ?This queue corresponds to 802.1p prioritization levels 6 and 7 and Foundry
priority levels 6 and 7.
C. qosp3 ?This queue corresponds to 802.1p prioritization levels 0 and 1 and Foundry
priority levels 0 and 1.
D. qosp3 ?This queue corresponds to 802.1p prioritization levels 6 and 7 and Foundry
priority levels 6 and 7.
Answer: D
Foundry Network certification FN0-100 FN0-100 examen certification FN0-100
NO.3 The show configuration command on a Foundry device will show the running
config.
A. T
B. F
Answer: B
certification Foundry Network FN0-100 examen certification FN0-100 FN0-100
NO.4 Which STP bridge parameter manages the interval a bridge will wait for receipt of
a hello packet before initiating a topology change?
A. priority
B. forward delay
C. maximum age
D. hello time
Answer: C
certification Foundry Network FN0-100 FN0-100 examen FN0-100 examen
NO.5 Which broadcast and pruning multicast protocol delivers IP multicast data to its
intended receivers? (Select all that apply)
A. PIM
B. ICMP
C. DVMRP
D. IGMP
Answer: A, C
Foundry Network FN0-100 examen FN0-100
NO.6 Which Foundry CLI command is used to copy the system image from the secondary
flash area to the primary?
A. copy flash primary
B. copy slot1 primary
C. copy secondary primary
D. copy flash flash primary
Answer: D
Foundry Network FN0-100 examen certification FN0-100 FN0-100 FN0-100 examen FN0-100
NO.7 Which routing protocol is used on the Internet to route traffic between Autonomous
Systems and to maintain loop-free routing?
A. OSPF
B. IBGP
C. BGP4
D. RIP
Answer: C
Foundry Network certification FN0-100 certification FN0-100 certification FN0-100
NO.8 Foundry route health injection feature supports health checks for which of the
following?
A. All TCP traffic
B. All TCP and UDP traffic
C. HTTP only
D. HTTP, POP3, and SNMP
Answer: C
certification Foundry Network FN0-100 FN0-100
NO.9 Which Foundry SLB predictor uses a percentage distribution?
A. round robin
B. weighted
C. least connections
D. delay
Answer: B
Foundry Network certification FN0-100 FN0-100 examen FN0-100 examen
NO.10 What is the maximum hop count allowed by RIP?
A. 15
B. 10
C. 255
D. no limit
Answer: A
Foundry Network FN0-100 certification FN0-100 FN0-100
NO.11 Foundry trunking groups on L3 routers load share based on destination IP/IPX
address.
A. T
B. F
Answer: A
Foundry Network examen certification FN0-100 FN0-100 examen FN0-100
NO.12 What does a Foundry ACL ID identify?
A. An ACL as standard or extended
B. Number of entries.
C. A collection of individual ACL entries
Answer: C
Foundry Network FN0-100 FN0-100 FN0-100 certification FN0-100 FN0-100
NO.13 Exhibit:
The diagram shows an OSPF network with no designated router (DR) and no
backup designated router (BDR). Which of the following statements identifiy which
routers will be selected DR and BDR?
A. Router C is DR, Router B is BDR
B. Router B is DR, Router A is BDR
C. Router B is BDR, Router A is DR
D. Router A is DR, Router C is BDR
Answer: B
Foundry Network certification FN0-100 FN0-100 FN0-100 examen certification FN0-100
NO.14 Which Foundry CLI command should be used to add an unencrypted community
string?
A. snmp-server community private rw
B. snmp-server community 0 private rw
C. snmp-server community 1 private rw
D. snmp-server community clr private rw
Answer: B
certification Foundry Network FN0-100 certification FN0-100 certification FN0-100 FN0-100
NO.15 An OSPF interface configured to be passive will perform which of the following?
A. send and receive OSPF updates
B. receive but not forward OSPF updates
C. will not send or receive OSPF updates
D. will not receive but forward OSPF updates
Answer: C
Foundry Network examen FN0-100 certification FN0-100 FN0-100 examen
NO.16 What feature allows a switch to detect and switch web traffic to a local cache server
within the network?
A. http header hashing
B. SSL session ID switching
C. transparent cache switching
D. cache route optimization
Answer: C
certification Foundry Network FN0-100 examen FN0-100 certification FN0-100
NO.17 Which of the following commands will correctly configure a Foundry Layer 3
Switch to learn routes from all neighbors except 192.168.1.170?
A. BigIron(config-rip-router)# neighbor 2 deny 192.168.1.170
B. BigIron(config-rip-router)# neighbor 1024 permit any BigIron(config-rip-router)#
neighbor 2 deny 192.168.1.170
C. BigIron(config-rip-router)# neighbor deny 192.168.1.170 BigIron(config-rip-router)#
neighbor 1024 permit any
D. BigIron(config-rip-router)# neighbor 2 deny 192.168.1.170
BigIron(config-rip-router)# neighbor 1024 permit any
Answer: D
Foundry Network FN0-100 FN0-100 FN0-100 FN0-100
NO.18 Which Foundry CLI command is used to provide privileged user mode?
A. access
B. enable
C. super-user
D. config t
Answer: B
Foundry Network FN0-100 examen FN0-100 FN0-100 examen
NO.19 The appletalk echo protocol (AEP) is equivalent to which IP protocol?
A. UDP
B. TCP
C. ARP
D. ICMP
Answer: D
Foundry Network examen certification FN0-100 FN0-100 FN0-100 examen
NO.20 What transport layer protocol provides a connection oriented service?
A. UDP
B. STP
C. TCP
D. ARP
Answer: C
Foundry Network FN0-100 certification FN0-100
没有评论:
发表评论