Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test HP HP0-J33 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test HP HP0-J33 réel est lancée. C'est possible à réussir 100% avec le produit de HP HP0-J33. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.
Choisir le Pass4Test vous permet non seulement à réussir le test HP HP0-J33, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A HP HP0-J33 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.
Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test HP HP0-J33. Votre argent sera tout rendu si vous échouez le test.
Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A HP HP0-J33 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.
Code d'Examen: HP0-J33
Nom d'Examen: HP (Implementing HP )
Questions et réponses: 65 Q&As
C'est pas facile à passer le test Certification HP HP0-J33, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test HP HP0-J33 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test HP HP0-J33, vous allez passer le test HP HP0-J33 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.
HP0-J33 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-J33.html
NO.1 What is the source of the identifying data that is inserted into the HP CommandView EVA SNMP MIB
when it is generated?
A. SMI-S agent on management host
B. hardware ASIC in the first host port that sends the event
C. default parse file
D. controller software-specific parse file
Answer: D
HP examen HP0-J33 HP0-J33 examen HP0-J33 certification HP0-J33
NO.2 A disk group is set to double protection level and contains only Vraid1 virtual disks. What happens
when there is simultaneous loss of two physical disks from different mirrored pairs within the same
Redundant Storage Set?
A. The Vraid1 fails and there is data loss.
B. Vraid1 data migrate to Vraid5.
C. The Vraid1 virtual disk stays in degraded mode and data is preserved.
D. The Vraid1 data from the failed disks is reconstructed.
Answer: D
HP examen HP0-J33 examen certification HP0-J33 HP0-J33 HP0-J33
NO.3 Which statements are true about using thin provisioning in an EVA environment? (Select two.)
A. Extension of a LUN cannot be automated.
B. Capacity utilization is increased.
C. LUN shrink is not always supported for EVA.
D. Host agents must be installed on servers.
E. It can be performed within CommandView EVA.
Answer: BD
HP certification HP0-J33 HP0-J33
NO.4 Which components are mandatory Customer Self Repair (CSR) on an EVA4400, EVA6400 or
EVA8400 device shelf? (Select three.)
A. midplane
B. power supply
C. fan
D. backplane
E. disk drive
F. power UID board
Answer: BCE
HP certification HP0-J33 certification HP0-J33 HP0-J33
NO.5 Which interface is used to connect a FATA drive to an EVA controller? (Select two.)
A. single port
B. dual port
C. Serial ATA
D. Native Fibre Channel
E. Parallel ATA
Answer: BD
HP examen HP0-J33 examen HP0-J33
NO.6 Which feature is unique to the EVA8400 / 11GB cache (per controller) model when compared to other
EVA array models?
A. use of a third cache battery
B. 400TB addressable storage space
C. up to 5GB policy memory
D. maximum of 27 device shelves
Answer: A
HP HP0-J33 HP0-J33 examen HP0-J33 HP0-J33
NO.7 How does releveling occur after the loss of one disk in a 16-member group containing ten 10GB
Vraid1 Vdisks?
A. The group does not need to relevel.
B. across 16 disks in the group
C. across 15 disks in the group
D. across 14 disks in the group
E. across 10 disks in the group
Answer: D
HP examen HP0-J33 examen HP0-J33 examen
NO.8 What are required customer self-repair (replacement) parts in an EVA6400/8400? (Select two.)
A. controller cache battery
B. controller cache memory
C. hard disk drives
D. disk enclosure fan
E. Fibre Channel transceivers
Answer: CD
certification HP HP0-J33 HP0-J33 certification HP0-J33
NO.9 Which EVA virtualization features help reduce customer Total Cost of Ownership? (Select two.)
A. load customization
B. LUN definition ruleset
C. pre-set VRAID security
D. reduced stranded capacity
E. significantly increased utilization
Answer: DE
certification HP HP0-J33 HP0-J33 HP0-J33
NO.10 What is a physical segment (PSEG) in the EVA context?
A. smallest virtual disk space allocated on a disk drive
B. smallest physical disk space allocated on a disk drive
C. disk space containing information about the selected redundancy level of the virtual disk
D. data portion read from or written to a physical disk before the next physical disk is accessed
Answer: B
HP HP0-J33 HP0-J33 examen HP0-J33 examen HP0-J33 examen
NO.11 How do you access the web-based operator control panel after installing CommandView EVA on the
management module?
A. https://<storagesystem>:2373
B. https://<storagesystem>:2372
C. https://<storagesystem>:2301
D. https://<storagesystem>:2381
Answer: A
certification HP HP0-J33 HP0-J33 examen
NO.12 Which interconnect technology is used when integrating the mpx110 router into an EVA solution?
A. FCIP
B. FICON
C. iSCSI
D. WDM
Answer: A
HP HP0-J33 examen certification HP0-J33 HP0-J33
NO.13 Which statements are true about mirrorclones? (Select two.)
A. If the mirrorclone is in a normalized state, you can only detach it.
B. The redundancy (Vraid) level of a mirrorclone must be the same or higher than the source.
C. Amirrorclone delta restore may be made when the mirrorclone source is also the source for a DR
group.
D. A detached mirrorclone cannot be reattached to its source.
E. HP recommends keeping mirrorclones in the same disk group as the source.
Answer: CD
certification HP HP0-J33 examen HP0-J33
NO.14 You create a Vraid0 LUN in an EVA with 16 disks consisting of two 8-drive RSS sets. What will happen
if a single disk fails?
A. The LUN will fail even with an RSS configured.
B. The LUN will continue to operate normally due to the redundancy provided by the RSS sets.
C. The LUN cannot be configured across two RSS sets.
D. The LUN will continue to operate at reduced performance while the RSS sets rebuild the lost data.
Answer: A
HP examen HP0-J33 certification HP0-J33 HP0-J33
NO.15 Which feature is unique to the EVA4400 compared to the EVA6400 and EVA8400?
A. support of 2048 LUNs
B. use of array-based management
C. RoHS 6 of 6 compliant disk shelves
D. large LUN support
Answer: B
HP HP0-J33 examen HP0-J33
NO.16 for the HP EVA, where do you find error messages, status code values, meanings, and appropriate
corrective actions?
A. product replacement instructions
B. WEBES System Event Analyzer
C. product user guide
D. HP CommandView EVA
Answer: C
HP examen HP0-J33 HP0-J33 certification HP0-J33
NO.17 What happens when you set the failure protection level for a disk group with same-sized disks on an
EVA to single?
A. Two disks are reserved as spare space.
B. A one-disk equivalent is reserved as spare space.
C. One disk is reserved as spare space.
D. A two-disk equivalent is reserved as spare space.
Answer: D
HP HP0-J33 HP0-J33 certification HP0-J33 certification HP0-J33
NO.18 What are functions of the web-based operator control panel of an EVA4400? (Select three.)
A. view OCP log messages
B. configure SMI-S credentials
C. restart a controller
D. perform disk firmware upgrade
E. enter WWN to initialize system
F. perform array firmware upgrade
Answer: ACE
HP examen HP0-J33 examen HP0-J33
NO.19 Which service is included in the EVA6400/8400 warranty?
A. HP Support Plus service
B. HP EVA Firmware Upgrade service
C. HP Implementation service
D. HP Installation & Startup service
Answer: D
HP HP0-J33 examen certification HP0-J33
NO.20 What must be considered when configuring the Internet Protocol settings of an EVA4400
management module?
A. The WOCP requires an IPv6 network.
B. The IP address range is restricted.
C. A limited set of protocols is supported.
D. The localhost alias must be disabled.
Answer: B
HP certification HP0-J33 HP0-J33 HP0-J33
Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification HP HP0-J33. Le guide d'étude de Pass4Test comprend les excercices de HP HP0-J33 et la Q&A qui peut vous permetrre à réussir 100% le test HP HP0-J33. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.
没有评论:
发表评论