Choisir le Pass4Test vous permet non seulement à réussir le test SASInstitute A00-212, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A SASInstitute A00-212 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.
Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A SASInstitute A00-212 comme votre guide d'étude.
Code d'Examen: A00-212
Nom d'Examen: SASInstitute (SAS Advanced Programming Exam for SAS 9)
Questions et réponses: 153 Q&As
Votre vie changera beaucoup après d'obtenir le Certificat de SASInstitute A00-212. Tout va améliorer, la vie, le boulot, etc. Après tout, SASInstitute A00-212 est un test très important dans la série de test Certification SASInstitute. Mais c'est pas facile à réussir le test SASInstitute A00-212.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test SASInstitute A00-212 sans aucune doute si vous choisissez le Pass4Test.
Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test SASInstitute A00-212, la voie à la réussite de votre professionnel sera ouverte pour vous.
La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel SASInstitute A00-212 peut vous assurer à réussir 100% le test SASInstitute A00-212. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
A00-212 Démo gratuit à télécharger: http://www.pass4test.fr/A00-212.html
NO.1 The SAS data set WORK.TEMPDATA contains the variables FMTNAME, START and
LABEL and it consists of 10 observations.
The following SAS program is submitted:
Proc format cntlin=wor.tempdata;
Run;
What is the result of submitting the FORMAT procedure step?
A. It uses the WORK.TEMPDATA SAS data set as input to create the format
B. All formats created will be stored in two WORK.TEMPDATA SAS data set
C. An ERROR message is written to the SAS log because the program is incomplete
D. NO formats are created in this step
Answer: A
certification SASInstitute A00-212 A00-212
NO.2 Given the SAS data set SAUSER.HIGWAY:
SASUSER.HIGHWAY
The following SAS program is submitted:
%macro highway;
proc sql nonprint;
%let numgrp=6;
select distinct status into:group1-:group&numgrp from sasuser.highway;
quit;
%do i=1 %to &numgrp;
proc print data =sasuser.highway;
where status ="&&group&I";
run;
%end;
%mend;
%highway
How many reports are produced?
A. 2
B. 6
C. 0
D. 5
Answer: A
certification SASInstitute A00-212 examen A00-212 A00-212
NO.3 Given the SAS data sets ONE and TWO:
The following SAS program is submitted:
Proc sql;
Select two.*,budget from one <insert JOIN operator here> two on one.year=two.year,
Quit;
The following output is desired:
Which JOIN operator completes the program and generates the desired output? A. FULL JOIN
B. INNER JOIN
C. LEFT JOIN
D. RIGHT JOIN
Answer: A
SASInstitute examen A00-212 examen A00-212 A00-212 A00-212 examen A00-212 examen
NO.4 Which SQL procedure program deletes rows from the data set CLASS? A. proc sql;
Select * from class
Where age<(select stop_age from threshold);
Quit;
B. proc sql;
Modify table class
Delete where age<(select stop_age from threshold);
Quit
C. proc sql;
Delete from class
Where age<(select stop_age from threshold);
Quit;
D. proc sql;
Alter from class
Delete where age<(select stop_age from threshold);
Quit;
Answer: C
SASInstitute certification A00-212 A00-212
NO.5 Which SET statement option names a variable that contains the number of the
observation to read during the current iteration of the DATA step? A. NOBS=pointobs
B. OBS=pointobs
C. KEY=pointobs
D. POINT=pointobs
Answer: D
SASInstitute A00-212 A00-212
NO.6 Given the SAS data set ONE:
ONE
DIVISION SALES
A 1234
A 3654
B 5678
The following SAS program is submitted:
Data_null_;
Set one;
By divition;
If first.division then
Do;
%let mfirst=sales;
end;
run;
What is the value of the macro variable MFRIST when the program finishes execution?
A. 1234
B. sales
C. 5678
D. null
Answer: B
SASInstitute A00-212 A00-212 A00-212 certification A00-212
NO.7 Which SAS procedure changes the name of a permanent format for a variable stored in a SAS data
set?
A. DATASETS
B. MODIFY
C. FORMAT
D. REGISTRY
Answer: A
SASInstitute examen A00-212 A00-212 examen A00-212 examen A00-212 examen
NO.8 Which SET statements option names a variable that contains the number of the
observation to read during the current iteration of the DATA step? A. OBS=pointobs
B. POINT=pointobs
C. KEY=pointobs
D. NOBS=pointobs
Answer: B
certification SASInstitute certification A00-212 A00-212 A00-212 certification A00-212 certification A00-212
NO.9 The following SAS program is submitted:
Data sasuser.history;
Set sasuser.history(keep=state x y
Rename = (state=ST));
Total=sum(x,y);
Run;
The SAS data set SASUSER.HISTORY has an index on the variable STATE.
Which describes the result of submitting the SAS program?
A. The index on STATE is deleted and an index on ST is created
B. The index on STATE is recreated as an index on ST
C. The index on STATE is deleted
D. The index on STATE is updated as an index on ST
Answer: C
SASInstitute A00-212 examen A00-212
NO.10 The following SAS program is submitted:
%macro check(num=4);
%let result=%eval(&nm gt 5);
%put result is &result;
%mend;
%check (num=10)
What is written to the SAS log?
A. result is true
B. result is 10 gt 5
C. result is 1
D. result is 0
Answer: C
SASInstitute A00-212 examen certification A00-212 certification A00-212
NO.11 The following SAS program is submitted:
%let a=cat;
%macro animal(a=frog);
%let a=bird;
%mend;
%animal(a=pig)
%put a is &a;
What is written to the SAS log?
A. a is pig
B. a set cat
C. a is frog
D. a is bird
Answer: B
SASInstitute examen A00-212 examen A00-212
NO.12 The following SAS program is submitted:
%let dept=prod;
%let prod=merchandise;
The following message is written to the SAS log:
The value is "merchandise"
Which SAS System option writes this message to the SAS log? A. %put the value is "&&&dept";
B. %put the value is "&&&dept";
C. %put the value is "&&&dept";
D. %put the value is %quote(&&&dept);
Answer: A
SASInstitute A00-212 examen A00-212 certification A00-212
NO.13 The following SAS program is submitted:
%macro check(num=4);
%let result=%sysevalf(&num+0.5);
%put result is &result;
%mend;
%check(num=10)
What is the written to the SAS log?
A. result is
B. result is 10.5
C. result is 10+0.5
D. result is 10
Answer: B
SASInstitute A00-212 certification A00-212 A00-212
NO.14 The following SAS program is submitted:
%macro one(input);
%two;
%put the value is &date;
%mend;
%macro two;
data _null_;
call symput('date','12SEP2008');
run;
%mend;
%let date=31DEC2006;
%one(&date)
What is the result when the %PUT statement executes.?
A. A macro variable DATE with the value 12SEP2008 is retrieved from the local symbol
table for the ONE macro
B. A macro variable DATE with the value 12SEP2008 is retrieved from the local symbol
table for the TWO macro
C. A macro variable DATE with the value 12SEP2008 is retrieved from the global
symbol table
D. A macro variable DATE with the value 31DEC2006 is retrieved from the global
symbol table
Answer: C
SASInstitute A00-212 A00-212 examen A00-212 examen A00-212 examen
NO.15 CORRECT TEXT
The following SAS program is submitted:
%macro check(num=4);
%let result=%sysevalf(&num+0.5);
%put result is &result;
%mend;
%check(num=10)
What is the written to the SAS log?
result is
result is 10
result is 10.5
result is 10+0.5
Answer: C
SASInstitute certification A00-212 A00-212 A00-212 A00-212 examen
NO.16 The following SAS program is submitted:
data temp;
length 1 b 3 x;
infile 'file reference';
input a b x;
run;
What is the result?
A. The data set TEMP is not created because variables A and B have invalid lengths
B. The data set TEMP is created, but variable X is not created
C. The data set TEMP is not created because variable A has an invalid length
D. The data set TEMP is created and variable X has a length of 8
Answer: C
SASInstitute A00-212 A00-212 A00-212 examen
NO.17 When reading a SAS data file, what does the NOBS=option on the SET statement
represent?
A. A variable that represents the total number of observation in the output data set(s)
B. A variable that represents a flag indicating the end of the file
C. A variable that represents the total number of observations in the input data set(s)
D. A variable that represents the current observation number
Answer: C
certification SASInstitute A00-212 examen A00-212 A00-212 examen A00-212 examen certification A00-212
NO.18 The following SAS program is submitted:
%micro test(var);
%let jobs=BLACKSMITH WORDSMITH SWORDSMITH;
%let type=%index(&jobs,&var);
%put type = &type;
%mend;
%test(SMITH)
What is the value of the macro variable TYPE when the %PUT statement executes?
A. 0
B. Null
C. 6
D. 3
Answer: C
SASInstitute A00-212 A00-212 examen A00-212
NO.19 The following SAS program is submitted:
date view=sauser.ranch;
describe;
run;
What is the result?
A. The program creates a DATA step view called SASUSER.RANCH and places the
program cod in the current editor window
B. The program retrieves the SAS source code that creates the view and places it in the
output window
C. The program creates a DATA step view called SASUSER.RANCH and places it in the
SAS log
D. the program retrieves the SAS source code that creates the view and places it in the
SAS log
Answer: D
SASInstitute A00-212 examen A00-212
NO.20 The following SAS program is submitted:
%let first=yourname;
%let last=first;
%put &&&last;
What is written to the SAS Log?
A. First
B. Yourname
C. &&First
D. &yourname
Answer: B
SASInstitute A00-212 A00-212 examen A00-212 A00-212 examen
Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification SASInstitute A00-212. Le guide d'étude de Pass4Test comprend les excercices de SASInstitute A00-212 et la Q&A qui peut vous permetrre à réussir 100% le test SASInstitute A00-212. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.
没有评论:
发表评论